LBL Lighting Upstate 18 - Manual (Page 3)

3
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Hook the top of the fixture to the top of the mounting
plate and swing the bottom of the fixture toward the
plate until it is flush with the wall.
With the allen wrench, tighten the set screws at the
bottom of the fixture to secure it to the mounting plate.
1E
10
11
12
1F
13
14
12
10
11
13
15 For wet locations, caulk around the base with
waterproof construction sealant.
1G
14