LBL Lighting Fiona 18 Flush Mount CF - Manual (Page 3)

3
3A
Install the Lamps and Diffuser
LAMP SOCKET
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: To re-lamp, reverse the section 3 instructions
to remove the diffuser and gain access to the lamps
and sockets.
3B
2
STEEL WASHER
DIFFUSER CAP
PLASTIC WASHER
THREADED NIPPLE
Unscrew the diffuser cap and remove it along with the
washers from the socket assembly.
3C
3
STEEL WASHER
DIFFUSER CAP
PLASTIC WASHER
THREADED NIPPLE
DIFFUSER
Insert the steel washer onto the threaded nipple,
followed by one of the plastic washers.
Insert the glass diffuser onto the nipple and against the
shade pegs, followed by the second plastic washer and
secure it by screwing the diffuser cap back into place.
SHADE
PEG
2 1 Push the lamps into the sockets.
Use Watt GX24Q-3 Base
MAX 32
Triple Tube Compact Fluorescent Lamp.
PLASTIC WASHER
4
4
3
NOTE: Do not over tighten the shade. Over-
tightening may break the glass resulting in injury.