LBL Lighting Presidio W - Manual (Page 4)

4
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, exposure to
excessive UV radiation, or injury to person:
– Do not look directly at the lighted lamp.
– Do not remain in light if skin feels warm.
– Risk of fire: Use only the type of lamp and maximum
wattage indicated in this instruction manual.
– Never cover the halogen lamp with anything other than an
LBL Lighting lamp shield and never place flammable
material close to your fixture.
– Do not touch the fixture shades or lamp shield while the
fixture is on.These surfaces may be HOT.
– To avoid glare in child's eyes, hang the fixture at least 18”
above a table.
Halogen Lamp General Information
– It is normal for a new halogen lamp to smoke slightly
on first use.The protective coating is being vaporized.
Prolonging Halogen Lamp Life
– Do not touch the lamp with bare hands.Any contaminant,
even the oil from your hands can deteriorate the lamp.
Handle the lamp with a soft, clean cloth. Rubbing alcohol
can be used to remove any contaminant from the lamp.
– Do not run the lamps at full power when you do
not need to. However, if dimming the fixture for an
extended period of time, occasionally bring the light up to
full brightness for a few minutes to complete the halogen
cycle.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company