Install the lamp & shade, Save these instructions – LBL Lighting Linear WCF User Manual
Page 2
2A
2
Place all wires and wire nut connections properly inside the
electrical box.
Slide the mounting plate center hole onto the exposed
threaded nipple. Secure the mounting plate in place by
tightening the cap to threaded nipple.
THREADED
NIPPLE
Install the Lamp & Shade
Push the lamp pins completely into the socket holes.
LAMP
SOCKET
Use
Watt Twin Tube
MAX 13
2GX7 Base Compact Fluorescent Lamp.
THUMB
SCREW
GLASS
SHADE
MOUNTING
PLATE
5
CAP
Place the glass shade onto the mounting plate. Align the glass
shade holes with the mounting plate holes and tighten (Do
Not Over Tighten) the thumb screws to secure the glass
shade in place.
NOTE:
Do not over tighten the thumb screws.
Overtightening may break the glass and result in injury.
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
6
1C
7
6
7
1
1
2
2B
2
2