LBL Lighting Juniper WCF3 User Manual
Juniper 2x13w compact fluorescent wall, Install the fixture

Installation Instructions for
Juniper 2x13W Compact Fluorescent Wall
1.3
PW230OPSC213_
980JUNIPWCF3
G
P
I
:
ENERAL
RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for damp locations.
Install the Fixture
Feed the fixture wires through the mounting plate side hole.
Make sure that the crossbar is grounded in accordance with
local electrical codes.
Connect the fixture white wire to the neutral power line wire
with a wire nut.
Connect the fixture black wire to the hot power line wire with
a wire nut.
1
MOUNTING PLATE
FIXTURE WIRES
2
Mount the crossbar assembly to the electrical box holes with
the two #8-32 screws provided.
CROSSBAR
ASSEMBLY
ELECTRICAL BOX HOLE
#8-32 SCREW
1A
1
2
1
1B
2
3
4
1
4
5
5
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
Wall