LBL Lighting Omni w/Cover Small LED - Manual (Page 2)

7
1C
1
2A
8
2
3
2
Install the Shade
Line up the anchor with the center of the mounting plate hole
and push the anchor into the wall up to the threads.
Screw the anchor the rest of the way in with a screwdriver.
Secure the mounting plate to the anchor with the screw and
washer provided.
ANCHOR
SCREW
WASHER
SHADE
SUPPORT
ARM
SHADE
SUPPORT
ARM
SHADE
ALLEN
WRENCH
Use the Allen wrench to remove the upper shade support arm.
Place the shade into the slot in the lower shade support arm.
Line up the slot in the upper shade support arm with the top
of the shade.
Use the Allen wrench to attach the shade support arm to the
top of the fixture.
6
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
4
3
2