LBL Lighting Ashland - Manual

1
Installation Instructions for 980ASHLNDW
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Fixture
1.0 WS696_LED
1A
Attach the mounting plate to the electrical box using
the two #8-32 screws provided. 1
Wall
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product may be dimmed using a low voltage electronic dimmer.
This instruction shows a typical installation.
1B
Ashland Wall (LED)
1 1
MOUNTING
PLATE
SCREW
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white driver wire to the neutral power line
wire with a wire nut.
Connect the black driver wire to the hot power line wire
with a wire nut.
2
3
4
2
3 4
MOUNTING
PLATE
FIXTURE
DRIVER