LBL Lighting MO Telescoping Rigid Standoff - Manual (Page 3)

3
Adjust Standoff Height (Optional)
Slightly loosen the M3 set screw on the (Do Not Remove)
side of the telescoping post with the 1.5 MM Allen wrench
provided.
Adjust standoff height and tighten M3 set screw.
Repeat these steps for each standoff.
M3 SET
SCREW
1.5MM ALLEN
WRENCH
TELESCOPING POST
Insert the Monorail through the plastic insulator.
Install the Monorail
For all standoffs, slightly loosen the two (Do Not Remove)
M3 set screws on the side of the housing with the 1.5MM Allen
wrench to ease inserting the Monorail.
PLASTIC
INSULATOR
1.5MM ALLEN
WRENCH
MONORAIL PLASTIC INSULATOR
1A
1
2
3
4A 1A
1
2
5A
1A 5B
1
2
2