LBL Lighting Cypree Large User Manual

Cypree small & large pendant, Adjust the fixture height

ENERAL

RODUCT NFORMATION

This product is ETL listed and suitable only for indoor dry locations

and approved for use at any height above the finished floor.

CAUTION - RISK OF FIRE

This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.

Fusion Jack

™

Adjust the Fixture Height

Installation Instructions for

Cypree Small & Large Pendant

1.2

HS46_

980FSJCYPREP

GLASS SHADE

SOCKET ASSEMBLY

FIXTURE COAXIAL
CABLE

Feed the fixture coaxial cable through the glass shade. Slide the

glass shade down the cord and rest it onto the socket

assembly.

Cut the coaxial cable to the desired length.

SET SCREW

Back out (do not remove) the set screw on tip of the
connector with the provided Allen wrench.

ALLEN WRENCH

Back out (do not remove) the set screw on the conical
connector with the provided Allen wrench.

SET SCREW

ALLEN WRENCH

CONNECTOR

This manual is related to the following products:

Cypree Small