Warning, Select wash cy cle. refer to figure 7, Operation 11 – Alliance Laundry Systems Hardmount Coin and OPL User Manual
Page 13: Figure 5, Figure 6, Figure 7
Operation
11
F232134
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
3. Load to capacity whenever possible. DO NOT
OVERLOAD. Refer to Figure 5.
NOTE: Underloading can cause out-of-balance
conditions that can shorten machine life.
Figure 5
4. Close door and turn handle counterclockwise
until button pops out. Refer to Figure 6.
Figure 6
5. Select wash cycle. Refer to Figure 7.
Figure 7
6. At start of cycle, add liquid and/or powder
supplies to supply dispenser. Refer to Figure 8.
a. Add detergent to container 1.
b. Add softener to container 3.
For non-coin models: Liquid supplies may be
injected directly into the supply dispenser by an
external chemical supply dispenser. Refer to
Installation and Programming Manuals.
U003IE1A
U005IE1B
U005IE1B
U002IE1A
SP
IN
CYCLE INDICATOR
WASH CYCLES
PREW
AS
H
W
A
S
H
R
IN
S
E
ON
ADD BLEACH
WHEN LIT
HOT
WARM
WARM
COLD
HEAVILY
SOILED
PERM-
PRESS
NORMAL
WASH
DELICATE
KNITS
To avoid personal injury, recommended
inlet water temperature should be no
higher than 125° Fahrenheit (51° Celsius).
W709
WARNING