LBL Lighting Mezzo 3-Light S - Manual (Page 3)

3
4
CAP NUT
Properly place all wires and wire nut connections into
the canopy.
Mount the fixture by reinstalling it onto the mounting
plate and secure it tightly with the cap nuts.
CANOPY
3B
5
Expose the socket by raising the outer shade.
Raise the inner shade and feed the cord through until
the socket is exposed at the bottom.
Screw the collar nut onto the socket until only a couple
threads remain.
INNER SHADE
Install the Shade
SOCKET
COLLAR NUT
4A
1
2
3
1
OUTER SHADE
3
Gently lower both shades until they rest properly on the
socket.
Repeat for each pendant.
SOCKET
4B
4
OUTER SHADE
THREAD
2
INNER SHADE
5