LBL Lighting Mademoiselle S - Manual

Installation Instructions for
Mademoiselle Suspension (LED)
1.0
980MADEMS
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Suspension
SU697_LED
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a low-voltage electronic dimmer.
Shorten the Power Cord
1A
Take note of the wire connections and remove the wire nuts
to disconnect the power cord wires from the driver wires.
1
POWER CORD
SET SCREW
2B
Loosen the set screw on the strain relief. (Do Not Remove)
Remove the crossbar from the canopy by completely
unscrewing the strain relief.
2
STRAIN RELIEF
CROSSBAR
CANOPY
3
2
3
SET SCREW
1B
2
STRAIN RELIEF
CROSSBAR
CANOPY
3
2
3
1
2
2
2
1C
AIRCRAFT
CABLE
4
5
6
7
Feed the aircraft cable through the cable clutch in the canopy.
Pull the aircraft cable up through the canopy to determine the
fixture height.
Cut off the excess aircraft cable leaving enough for fine leveling
later.
Pull the power cord through the canopy to the desired length.
CABLE
CLUTCH
STRAIN RELIEF
6
4
7
POWER CORD
CANOPY