Flytec 4010 * - Manual (Page 18)

Operating Instructions FLYTEC 4010 17
Time measurement and temperature display setting mode
The key and the key are used in setting
mode to set the time. The hours and minutes are
set first and confirmed with the key. The date
can now be entered in precisely the same way.
This input is again confirmed with the key. The
year is also entered and confirmed in the same
way.
Time measurement and temperature display
option mode
The temperature display can be switched on or off
at the first level of option mode. If it is switched on,
the TEMP indicator will flash as well as a TIME indi-
cator. When the temperature display is switched
off, only the TIME indicator is on.
The unit of the temperature display (° Celsius or °
Fahrenheit) can be selected at the second level
using the key and the key.
START - STOP
RESET
CLEAR ALT 2
START - STOP
RESET
CLEAR ALT 2
SET-MODE
set time
OPTION-MODE
Display
• Time & Temp
• Time
Temp Unit
°C - °F
TIME/TEMP
TIME
TIME 4 Sec.
OPTION
TIME
OPTION
➀
➁
TIME
SPEED
MEMO
TIME
SPEED
MEMO