Flytec 4020 * - Manual (Page 19)

Operating Instructions FLYTEC 4020 18
Logbook
General remarks
The maximum values of the current flight and those of the previous 19 flights are saved in
memory and can be invoked in the MEMO display and printed out on a printer. You can access
the MEMO display by repeatedly pressing the key until the MEMO indicator appears.
The maximum values saved are:
• Maximum absolute altitude ALT 1
• Maximum relative altitude ALT 2
• Maximum ascent and descent VARIO bar display
• Flying time CHRONO
• Date Lower display
The key and the key are used to display the flight required; flight 0 is the current
flight, the peak values of which are continuously updated. Flight 19 is the least recent flight
and is deleted whenever a new flight is saved to memory.
The maximum values of a flight are saved to memory automatically when the instrument is swit-
ched off. (Condition: the instrument has been switched on for at least 3 minutes and a diffe-
rence in altitude of at least 50 metres has been attained.)
Printout
The logbook can be printed out straight from the instrument via a printer cable onto a printer.
Either a serial or a parallel cable must be used dependent on the printer. The printout is star-
ted by pressing and holding down the key in the MEMO display, make sure that the MEMO
shows flight 0.
PRINT
START - STOP
RESET
CLEAR ALT 2
TIME
SPEED
MEMO