Appendix, Appendix a: phone-set command – Accton Technology SIP Gateway VG3300 Series User Manual
Page 77
15. Appendix
15.1. Appendix A: Phone-Set Command
Pick up the handset and listen for the dialing tone. Dial “##0000 and listen for three consecutive
tones before setting the following parameters. After input the parameters, please dial ‘# to end the
configuration.
Command Description
Parameters
01
IP State
0 : static; 1: DHCP; 2: PPPoE
02 IP
Address
xxx*xxx*xxx*xxx
03 Subnet
Mask
xxx*xxx*xxx*xxx
04 Default
Gateway xxx*xxx*xxx*xxx
05
Primary DNS Server
IP
xxx*xxx*xxx*xxx
06
Second DNS Server
IP
xxx*xxx*xxx*xxx
07
Select Signaling Port 0~65535
08
Select RTP Base Port 0~65534 (limit to even port number only)
09
PPPoE username
User name (use the mapping table to map
character into digits)
10
PPPoE password
Password (use the mapping table to map
character into digits)
11
DND
Do not Disturb, this line accept dial out call only.
All incoming call is terminated. 0 : Disable ; 1:
Enable
12
SIP Forward State
0 : Disable ; 1: Enable; 2: Busy; 3: No Answer
13 SIP
Forward
To
Number
The SIP number that this line will forward to. The
Forward To address is "key in phone-set
proxy registered". For example,
you key-in by phone-set. fwd.pulver.com is the
registered proxy of this gateway.
14
Change Service Port 1:FTP; 2:HTTP 3:Telnet (Port: 0-65535)
15
Change WEB
6 digits
74