beautypg.com

Asus DiGiMatrix AB-V10 User Manual

Page 85

background image

3-53

ASUS DiGiMatrix

Status - Ping Tab
The Ping tab allows you to verify the
connection of the host computer with
another computer in the network. To
ping a connection:

1.

Type the IP address of the
connection you want to verify in
the IP Address field.

2.

Configure the ping session by
assigning the size and count of
packet to send, and the time
limit for a ping session to continue (in milliseconds).

3.

Click the Ping button.

During the ping session, the Ping
button toggles into a Stop button.
Click Stop anytime to cancel the ping
session.

The session field displays information
on the verified connection including
the roundtrip time (minimum,
maximum, and average) and packets
sent, received, and lost after a ping
session.

Click the Clear button to clear the
session field.

Config - Basic Tab
The Basic tab provides general
information on network types and
other configurations.

Network Type. Select the type of
network that you wish to use. Select
Infrastructure mode to establish a
connection with an access point (AP).
In this mode, your system can access
wireless LAN and wired LAN
(Ethernet) via the AP. Select the Ad
Hoc
mode to communicate directly with other mobile clients within the
wireless LAN adapter range.

This manual is related to the following products: