Asus DiGiMatrix AB-V10 - Manual (Page 69)

3-37 ASUS DiGiMatrix
3.7.4 Setup Wizard
After configuring the wireless option,
the Setup Wizard window appears.
Click Next.
Selecting the wireless LAN adapter operating mode
The default setting of the wireless LAN adapter is Station Mode in an
Infrastructure type network. The first time you run the setup wizard, it scans
for available access points (AP) in your location and automatically selects
the AP with the best signal. The wizard also allows you to connect to any of
the available APs.
If you want to set your wireless LAN adapter in soft access point mode or in
Ad-hoc network setting, check My Configuration, then click Next. See “My
Configuration” section on page 3-39 for details.
Station Mode
Follow these instructions to set your
wireless LAN adapter in station (STA)
mode.
Select a wireless network from the
table, then click Next. The wireless
LAN adapter connects to the selected
network.
The setup wizard windows may vary on different operating systems.
Click the Search Again button to re-scan available access points in your
location.