Siemens LU17122 - Manual (Page 28)

28
Final assembly
Exhaust-air mode:
❑ Stick the enclosed covering foil over the
air outlet grille on the top of the
extractor hood.
Ensure that the surface is clean.
❑ Connect the pipes.
2-motor extractor hood
Selecting the operating mode:
❑ Exhaust-air mode: Position 1
❑ Circulating-air mode: Position 2
❑ Select the operating mode on the left or
right with a screwdriver.
❑ Connect to the power supply.
❑ Insert the filter grille
(see Instructions for use).
1
2
Weight in kg:
Exhaust air Width Circulating
air
50 cm
60 cm
1 motor
60 cm
2 motors
7,0
8,0
10,0
8,0
9,0
11,0
90 cm
Design changes with respect to technical development
shall remain withheld.
13,0 14,0