1x 2x 1x – Siemens DE2427555 User Manual

Page 14

Starting wellness program 2

Brieﬂy press the wellness program button

■

twice in succes-

sion. The display lights up in colour, the stored shower tempera-
ture appears in °C and the symbol

ﬂashes.

Now turn on the tap within 2 minutes and wellness program

■

2 commences. At ﬁrst, warm water will run for 1 minute (water
temperature depends on your setting) and then 30 °C warm
water will be dispensed for 30 seconds.

Tip: Wellness program 2 should be applied for several shower cy-
cles. They can be repeated as often as required.

Ending wellness program 1 or 2

Both programs will repeat until either the selected wellness pro-
gram button

is pressed once or the tap is shut off for more

than 1 minute. The temperature set before the program start in
now reactivated.

The programs can also be activated while the water is running.

Changing the wellness program temperature

The preset temperature for the warm phase is 39 °C. This can be

modiﬁed in a range from 30 °C to 42 °C.

Press the wellness program button

■

once to select wellness

program 1. The saved shower temperature in °C and the

symbol appears.

Keep wellness program button

■

pressed for 3 seconds to

select the programming function. The

symbol starts to

ﬂash rapidly.

Use the rotary knob to set the desired temperature between

■

30 °C and 42 °C.

Press the wellness program button

■

for 3 seconds to store

the new value.

The selected temperature is now saved in wellness program 1.