Matrix Orbital GLK24064-25 Legacy - Manual (Page 40)

Command Syntax Notes
Put pixel FE 70 [x][y]
254 112 [x][y]
254 ’p’ [x][y]
Puts pixel in position (x,y). Uses
current drawing color.
Draw outline rectangle FE 72
[color][x1][y1][x2][y2]
254 114
[color][x1][y1][x2][y2]
254 ’r’
[color][x1][y1][x2][y2]
Draws a rectangular outline using
color [color].
Draw solid rectangle FE 78
[color][x1][y1][x2][y2]
254 120
[color][x1][y1][x2][y2]
254 ’x’
[color][x1][y1][x2][y2]
Draws a solid rectangle using color
[color].
Initialize bar graph FE
67[ref][type][x1][y1][x2][y2]
254 103
[ref][type][x1][y1][x2][y2]
254 ’g’
[ref][type][x1][y1][x2][y2]
Sets aside space for a bar graph.
[ref] is reference number (0-15) for
use by the Write to Bar Graph com-
mand. [type] has values:
0 = vertical, starting from bottom
1 = horizontal, starting from left
2 = vertical, starting from top
3 = horizontal, starting from right
Write to bar graph FE 69 [ref][value]
254 105 [ref][value]
254 ’I’ [ref][value]
Fills the bar graph referred to as [ref]
from start to [value]. [value] is in
pixels.
Display saved bitmap FE 62 [ref][x][y]
254 98 [ref][x][y]
254 ’b’ [ref][x][y]
Causes bitmap [ref] to be displayed
with its top left corner starting at po-
sition (x,y).
Initialize Strip Chart FE 6A
[ref][x1][y1][x2][y2]
254 106
[ref][x1][y1][x2][y2]
254 ’j’
[ref][x1][y1][x2][y2]
[ref] is a reference number from 0 -
6, allowing 7 strip charts to be de-
fined.
Shift Strip Chart FE 6B [ref]
254 107 [ref]
254 ’k’ [ref]
[ref] selects the strip chart and the
direction in which it moves. Move-
ment is always 8 pixels at a time.
MSB = 0 shifts left
MSB = 1 shifts right.
Matrix Orbital GLK24064-25 36