beautypg.com

Matrix Orbital GLK24064-25 Legacy User Manual

Page 10

background image

Table 2: Connector Pinout

Pin 4

Ground

Pin 3

SDA (I

2

C data) / Rx

Pin 2

SCL (I

2

C clock) / Tx

Pin 1

Vdc

2.1.1 Power Connection (4 pin header)

Power is applied via pins 1 and 4.

Power requirement is;

• +5Vdc ±0.25V on standard voltage units
• +7Vdc to +30Vdc with Wide Voltage and Efficient Switching Power supply (-VPT).

Figure 4: Power Connector

2.1.2 Five Volt Power Cable

If a display module is used in a PC it becomes tempting to plug a spare power connector into the unit.

Don’t do this! Wiring for the PC power connector and that required for the module are different as shown

in the Figure below.

Figure 5: Wiring for Five Volt Modules

Matrix Orbital

GLK24064-25

6

See also other documents in the category Matrix Orbital Hardware: