Matrix Orbital GLK24064-25 Legacy - Manual (Page 30)

Table 7: File Format
0xFF 0xFF X size Y size Start End O-High O-Low
Width O-High O-Low Width O-High O-Low Width O-High
O-Low Width O-High O-Low Width O-High O-Low Width
O-High O-Low Width Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data Data Data Data
Data Data Data Data Data
6.4.2 Uploading the File to the Module
The “Upload font” command is used to actually upload the font file. Recall that the syntax for this
command is;
0xFE 0x24 [ref] [file size]
[file data]
In this example the file size is 94 bytes (0x5E) and the reference number is 2. The communications
exchange between the host and the module looks like this;
Matrix Orbital GLK24064-25 26