Waterloo F1526A2 - Manual (Page 6)

6
Front
Back
Reattach top
using existing
hardware.
• Place top on the bench in the desired location.
• Mark centers of mounting holes to be drilled.
• Drill 1/8" pilot holes in top.
• Reattach top using existing hardware.
• Wrench tighten all fasteners.
• Reinstall drawers.
STEP 6:
NOTE: To reattach the top, new pilot holes will need to be
marked and drilled.
STEP 5:
AA(4) EE(4) FF(4)
Front
Back
• Install tray as shown, using (4) AA, (4) EE and (4) FF.
• Finger tighten.
AA
EE
FF
AA
CC
D
Flange pointed
down
E
• Attach E to right end of D, using (1) AA, (1) CC, (1) EE and
(1) FF.
• Do not tighten.
EE
FF
AA
FF
D
Flange pointed
down
F
• Attach F to the other end of D in the same manner.
CC
EE
AA(2)
CC(2)
EE(2)
FF(2)
STEP 4:
Assemble tray.