Waterloo F1882 - Manual (Page 3)

Process:
• Remove the bottom drawer. See operation section: Re-
moving and Installing Drawers.
• Lay the cabinet on its back. Use packaging material to
protect the finish.
• Attach the casters using (4) 1/4 - 20 x 5/8" screws and
(4) 1/4 - 20 nuts per caster. Mount both swivel casters on
the same side of the unit as the side handle.
• Wrench tighten all screws.
• Return the unit to its upright position.
• Reinstall bottom drawers.
CASTER INSTALLATION
Items Needed:
1/4 - 20 x 5/8" (Qty: 16)
1/4 - 20 Nut (Qty: 16)
7/16-in Wrench
OUTLET STRIP INSTALLATION
• Attach outlet strip to plastic top using the screws (4)
provided with the outlet strip.
PLASTIC TOP INSTALLATION
• Slide the two plastic top pieces together and place on the
unit.
• Attach the top to the unit using (3) #14-10 x 3/4" screws
and (3) 1/4" washers. Be sure the individual tops are
snug against each other.
• Complete top attachment using (4) #14-10 x 3/4" screws
and (4) 1/4" washers.
• Insert plug into hole in the plastic top. NOTE: To use this
hole for cord management, remove the center portion of
the plug before installing.
• Place wood top on the plastic top.
Items Needed:
#14 - 10 x 3/4 Screw (Qty: 7)
1/4 - Washer (Qty: 7)
3
Screw
Nut