MagTek HALF CARD PORT User Manual

Page 2

2002-2007

MagTek

, Inc.

Printed in the United States of America

Information in this document is subject to change without notice. No part of this document may
be reproduced or transmitted in any form or by any means, electronic or mechanical, for any
purpose, without the express written permission of MagTek, Inc.

MagTek is a registered trademark of MagTek, Inc.

REVISIONS

Rev Number

Date

Notes

21 Jun 02

Initial Release

09 Sep 02

Editorial comments throughout. Sec 1: Buffered Mode, clarified data
and error status, clarified output when sensor is blocked or card
withdrawn, Related Documents, added source of ISO specs, Specs:
added cmps for card speed, added 6’ cable, corrected storage temp
to 176 degrees, modified Related Documents to qualify characters in
Tk 1 and Tk 2, corrected Fig 1-2 side view dimension. Sec 2:
corrected Table 2-1 and added Molex connectors, corrected Table 2-
2 by adding P designations. Sec 3: Table 3-2: added red and green
LED status and to note “LED controlled by Host”, added Watchdog
LED paragraph, added optional statement to card insertion block,
clarified Tables 3-3 and 3-4.

13 Jun 03

Front Matter: added ISO line to logo, changed Tech Support phone
number, added new warranty statement.

26 Jun 03

Sec 1: added part number to Table 1-1; Specifications: changed
operating temperature to before (32

F) and after (-4

F) 1 Nov 03

shipping date.

30 Aug 04

Sec 3, Table 3-2: changed To Set Option L(0x52) to L(0x4C); Table
3-3: added Card Inserted line and Card Removed line at the end of
the table, added “data buffer is cleared” to “Sends card data…” line.

15 Nov 04

Sec 1, Table 1-1: Added P/N 21066020, 215232 Insertion Reader
TK1,2 1Head Right, Half Card Port Powered, Black.

9 Feb 07

Added new model 21066000; updated throughout to include printed
circuit board 21067505; added ability to configure the communication
parameters; added configuration commands