Micr methods, Pinpad device class, Pinpad properties – MagTek OMTD 99875144 User Manual

Page 33

Section 4. Control Objects

MICR Methods

Method Name

Comments

BeginInsertion

This method either always returns success or causes a /read
check command to be sent to the MTD driver.

EndInsertion

This method always returns success. Optionally, it may wait until
/read check command completes or the specified timeout expires.

BeginRemoval

This method always returns success because the MICR devices
do not support its functionality.

EndRemoval

This method always returns success.

PINPad Device Class

PINPad Properties

Property Name

Comments

AvailableLanguagesList

This property is not supported because CapDisplay is
PPAD_DSP_UNRESTRICTED.

AvailablePromptsList

This property is not supported because CapDisplay is
PPAD_DSP_UNRESTRICTED.

CapDisplay

This property is initialized to PPAD_DSP_UNRESTRICTED,
which specifies that the Line Display CO is the interface to the
PINPad display.

CapLanguage This

property is initialized to PPAD_LANG_NONE because

CapDisplay is PPAD_DSP_UNRESTRICTED.

CapMACCalculation

This property is always FALSE. MAC calculation is not supported
due to security concerns.

CapKeyboard

This property is always FALSE. At a later time, access to the
keyboard functionality may be added through a POS Keyboard
control.

CapTone

This property is always FALSE because the IntelliPIN does not
have a Tone Indicator.

MerchantID

This property is supported, but has no effect on the operation of
the device (i.e., no commands are sent to the device).

MinimumPINLength

This property is supported, but cannot be modified. The minimum
PIN length is based on the current encode mode (M/S or
DUKPT).

Prompt

This property is not supported because CapDisplay is
PPAD_DSP_UNRESTRICTED.

PromptLanguage

This property is not supported because CapDisplay is
PPAD_DSP_UNRESTRICTED.

TerminalID

This property is supported, but has no effect on the operation of
the device.

TransactionType Only

PPAD_TRANS_DEBIT and PPAD_TRANS_CREDIT

options are supported because these are the transaction types
supported by IntelliPIN.