MagTek Excella, MICR Check Reader99875310 - Manual (Page 14)

Excella MICR Check Reader
8
1. Open the Outside Entry Guide by placing the thumb on the Indent and the finger(s)
on the Tab as shown in Figure 2-3 and squeezing, and then gently pull the Guide
open.
Figure 2-3. Opening the Entry and Exit Guides
2. Open the Outside Exit Guide, in the same manner, by placing the thumb on the
Indent and the finger(s) on the Tab, and squeezing and then gently pull the Guide
open.
3. Open the Printer/Cartridge Cover by pulling the Cover from the Inside Guide as
shown in Figure 2-4.
Figure 2-4. Separating the Cover from the Outside Entry Guide