beautypg.com

Trouble-shooting – AMICA KGC 15800 E DE User Manual

Page 53

background image

53

TROUBLE-SHOOTInG

Problems

Possible causes

Remedies

The appliance

does not work

The electric circuit is disrupted

- check whether the plug is properly inserted into

the socket

- check whether the power cable of the appliance

is not damaged

- check whether there is voltage in the socket, by

plugging another appliance, e.g. a night lamp

- check whether the appliance is switched on by

setting the thermostat to a position above 0.

The lighting inside

the chamber does

not work

The bulb is loose or fused (only applian-

ces with bulb lightning type)

- fit the bulb correctly or replace it (see section above

“Replacing the interior light bulb)

Temperature insi-

de the appliance

is not low enough

or too high

Incorrect setting of the adjustment knob

- reset the knob to a higher position

The ambient temperature is higher or

lower than the climate range from table

with technical specification

- the appliance is adapted to operation in the cli-

mate range from table with technical specification.

The appliance is located in a sunlit place

or near heat sources

- move the appliance to another place. Observe

the guidelines contained in the manual

Too much warm food loaded at a time

- wait 72 hours until the food becomes cool (fre-

ezes) and the required temperature is reached

inside the chamber

Internal air circulation obstructed

- place the food and containers in such a way that

they do not touch the rear wall of the fridge

The air circulation at the back of the

appliance is obstructed

- move the appliance min. 30 mm away from the

wall

The door of the frid- ge/freezer is opened

too often and/or remains open for too

long

- reduce the frequency of opening the door and/or

shorten the time when door remains open

The door does not close completely

- place the food and containers so that they would

not interfere with door closed

The compressor is switched on too rarely

- check whether the ambient temperature is not

lower than climate class

Door gasket inserted incorrectly

- press the gasket in

The appliance

works continu-

ously

Incorrect setting of the adjustment knob

- reset the knob to a lower position

See. ”Temperature inside the appliance

is not low enough for description of other

possible causes

See. ”Temperature inside the appliance is not low

enough for description of other possible remedies

Water collects in

the lower part of

the appliance

The water discharge opening is clogged

(depending on the model)

- clean the discharge opening (see the operating

manual – chapter entitled ”Defrosting the fridge”)

Internal air circulation obstructed

- place the food and containers in such a way as

that they do not touch the rear wall of the fridge

The appliance

generates unusual

noise

Incorrect levelling of the appliance

- level the appliance properly

The appliance is touching furniture and/or

other objects

- place the appliance at a location that ensures

proper clearances around it

Certain sounds can be heard during normal use of the refrigerator, which do not affect its correct operation.
Sounds, which can be easily prevented:

l

noise caused by the appliance which is not level - adjust the position with the adjustable turn-in front feet. Alterna-

tively, place pads made of soft material under the rear rollers, especially when the appliance is placed on tiles.

l

touching the adjacent piece of furniture - move the refrigerator away.

l

creaking of the drawers or shelves - take out and put back the drawer or shelf.

l

sounds of clinking bottles - move bottles apart.

Sounds heard during normal use are mainly due to operation of the thermostat, compressor (switching on) and cooling

system (thermal expansion and contraction of the radiator caused by flow of the cooling agent).

EN

This manual is related to the following products: