Phottix Atlas II - Manual (Page 6)

6
1. Turn off the camera and Phottix Atlas II
transceiver.
2. Slide the Atlas II transceiver into the
camera’s hot shoe mount.
3. Turn the Atlas II locking ring until tight.
4. Set the Transmit / Receive Mode Switch on
the Atlas II to Tx (transmit mode).
5. Turn on the Phottix Atlas II and the camera.
6. Set the camera and flash to Manual mode.
1. Turn off the flash and the Phottix Atlas II
transceiver.
Connecting to the camera hot shoe
Connecting a flash
to the Atlas II hot shoe
2. Slide the flash into the transceiver’ s hot shoe
mount.
3. Lock the flash with the flash’ s locking
mechanism.
4. Set the Transmit / Receive Mode Switch on
the Atlas II to Rx (receive mode).
5. Turn on the Phottix Atlas II and flash.
6. Set the flash to Manual mode.
* It is not unusual for the flash to discharge
once after turning on the Phottix Atlas II.
1. Turn off the flash/strobe and the Phottix
Atlas II transceiver.
Connecting a flash
or studio light by cable