Phottix Atlas II User Manual

Page 3

1. The Phottix Atlas II hot shoe connection is

designed to fire speedlight-type flashes that

are triggered by the center contact. Some

flashes (by Nissin, Sigma, and other manufac-

turers) may not be triggered by the center hot

shoe contact but by specific secondary

contacts. Please check your flash manual for

specifics. These flashes can be fired by PC Sync

cable if available.
2. The Atlas II is designed to work in Manual

Exposure mode and has no TTL functions.
3. Transmit or receive mode must be set on the

transceivers, the Atlas II will not do both at the

same time.
4. The Phottix Atlas II is not compatible with

previous Phottix Atlas series flash triggers.

INSTRUCTION MANUAL

Tip:

Turn off all devices – flashes/strobes,

cameras, and Phottix Atlas II transceivers -

when connecting and disconnecting devices.

The Phottix Atlas II has limited compatibility

with Phottix Odin, Strato II Multi 5-in-1 and

Phottix Strato 4-in-1 Wireless Trigger Systems.
1. Phottix Odin TCUs set on Channel 1, 2, 3 or 4

and in any group will trigger the Phottix Atlas II

set on Channel 1, 2, 3 or 4. Other Odin TCU

functions will not work with the Atlas II. Using

Odin TCUs in HSS mode may cause issues with

flash sync when using the Atlas II.
2. Phottix Strato II Transmitter set on Channel

1, 2, 3 or 4 and in any group will trigger the

Phottix Atlas II set on Channel 1, 2, 3 or 4.

Please Note

Compatibility