American Dryer Corp. ML-75V - Manual (Page 10)

6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Shaded areas are stated in metric equivalents
* For non-reversing models.
** A minimum of 3/4-inch pipe must be supplied to the gas inlet for each dryer.
IMPORTANT: Steam dryers must be provided with clean, dry, and regulated 80 PSI +/- 10 PSI
(5.51 bar +/- 0.69 bar) air supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
Gas
Electric
S
team
BASKET (TUMBLER) DIAMETER 37” 94 cm
BASKET (TUMBLER) DEPTH 36” 91.5 cm
BASKET (TUMBLER) MOTOR 1 HP* 0.746 kw
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
BASKET (TUMBLER) VOLUME 22.4 cu. ft. 0.634 cu. m.
DRYERS PER 20’/40’ CONTAINER 10/20
DRYERS PER 45’/48’ TRUCK 24/24
AIRFLOW 900 cfm 25.44 cmm
VOLTAGE AVAILABLE 120-460v 1ш-3ш 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs 327 kg
APPROX. WEIGHT (CRATED) 771 lbs 349.7 kg
HEAT INPUT 200,000 btu/hr 50,400 kcal/hr
INLET PIPE SIZE 3/4” N.P.T.**
VOLTAGE AVAILABLE 208-460v 1ш-3ш 50/60 Hz
APPROX. WEIGHT (UNCRATED) 721 lbs 327 kg
APPROX. WEIGHT (CRATED) 771 lbs 349.7 kg
VOLTAGE AVAILABLE 120-460v 1ш-3ш 50/60 Hz
APPROX. WEIGHT (UNCRATED) 757 lbs 343.4 kg
APPROX. WEIGHT (CRATED) 807 lbs 366.1 kg
COMPRESSED AIR VOLUME 0.75 cfh 0.02 cmh
AIR CONNECTION 1/8” F.P.T.
STEAM CONSUMPTION BOILER HP NORMAL LOAD
238.7 lbs/hr 108.3 kg/hr 7
OPERATING STEAM PRESSURE STEAM SUPPLY STEAM RETURN
125 PSI max 8.6 bar 1” F.P.T. 1” F.P.T.