Kenwood TK-3160E - Discontinued - Manual (Page 24)

16
M
AKING A
C
ALL
1 Make sure no parties are currently transmitting on your
selected channel.
2 Press the PTT switch and speak into the microphone in
your normal speaking voice.
• For best sound quality at the receiving station, hold the
microphone approximately 1.5 inches (3 ~ 4 cm) from your
mouth.
3 Release the PTT switch to receive.
R
ECEIVING A
C
ALL
Your dealer may have programmed QT or DQT signalling on
your transceiver. If your selected channel is programmed with
one of these features, you will hear calls only when another
party in your system makes a call. All other calls will not be
heard.
If your selected channel is not set up with QT or DQT, you will
hear calls made by any party (not just those in your system).