Kenwood TK-3160E - Discontinued User Manual

Page 15

NSTALLING

/ R

EMOVING

THE

PTIONAL

) R

ECHARGEABLE

ATTERY

ACK

LKALINE

ATTERY

ASE

1 Match the guides of the

battery pack with the
corresponding grooves on
the upper rear of the
transceiver, then firmly press
the battery pack to lock it in
place.

2 Flip the safety catch into

place to prevent accidentally
pressing the release latch
and removing the battery.

3 To remove the battery pack,

lift the safety catch, press the
release latch, then pull the
battery pack away from the
transceiver.

Note:
◆ To lift the battery pack safety catch, use a piece of hardened

plastic or metal, such as a screwdriver, that is no more than
6 mm wide and 1 mm thick. It is imperative that you place the
implement under only the lip of the safety catch so that you do
not damage the release latch.

◆ Before charging a battery pack that is attached to the transceiver,

ensure that the safety catch is firmly closed.

◆ While operating the transceiver using a Li-ion or Ni-MH battery

pack in areas with an ambient temperature of –10°C/ +14°F and
lower, operating time may be shortened.