Clearing the disconnection message, Making a voice dialing call, Making a voice dialing call 1 – Kenwood KDC-5751SD User Manual
Page 39
English
|
39
Making a voice dialing call
1
Enter Bluetooth mode
KDC-BT51U
Press the [ ] button.
KDC-5751SD
KDC-5051U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
2
Enter voice recognize mode
Turn the Control knob to select “Voice
Recognize”, and then press the Control knob.
3
Have the unit recognize your spoken name
Press the Control knob. If you hear a beep,
speak a registered name within 2 seconds.
4
Have the unit recognize the spoken category
When you hear a beep, speak the category
within 2 seconds.
The recognized phone number (name) is displayed.
When you want to change the displayed phone
number (name), press the [DISP] button.
5
Make a call
Press the Control knob.
⁄
•
If your voice cannot be recognized, a message is displayed.
Refer to
.
Pressing the Control knob allows you to retry voice input.
•
Both the name and category requires registration of a voice
tag. Refer to
(page 49)
.
Clearing the Disconnection message
KDC-BT51U
Press the [ ] button.
KDC-5751SD
KDC-5051U
Press the [LOG] button for at least 1 second.
“HF Disconnect” disappears.