Kenwood KMR-440U - Manual (Page 19)

English | 19
60MIN: Turns the power OFF after 60 minutes.
Function of the KDC-BT50U/ KDC-5047U.
41 Built in AUX: “Built-in AUX” ➤ “ON”, “OFF”
Sets whether to display AUX during source
selection.
42 CD Read: “CD Read” ➤ “1”, ”2”
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CDs may be unplayable even when set to
“2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
43 Favorite Delete: “Favorite Delete” ➤ Preset No.,
”All”
Deletes Favorite Preset Memory.
Refer to
(page 15) .
44 Built in Amp setting: “Built-in AMP” ➤ “ON”,
“OFF”
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
45 Speaker Select: “Speaker Select” ➤ “OFF”,
”5/4inch”, ”6x9/6inch”, ”O.E.M”
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type Display
OFF “OFF”
For 5 & 4 in. speaker “5/4inch”
For 6 & 6x9 in. speaker “6x9/6inch”
For the OEM speaker “O.E.M”
46 Firmware Upgrade: “F/W Update #.##” ➤ “USB”,
”CD”
Upgrades the firmware.
Selecting “YES” and then pressing [ENTER] button
starts upgrading the firmware.
For how to update the firmware, access our web
site.
http://www.kenwood.com/cs/ce/
Demo Mode Settings
47 Demo Mode: “DEMO Mode” ➤ “ON”, “OFF”
Specifies whether to enable demonstration.
Function of KDC-BT50U/ KCA-BT200 (Optional
Accessory)
Bluetooth Settings
48 Phone Selection: “Phone Selection”
Select a cell-phone subject to hands-free
connection. Refer to
device You Wish to Connect> (page 30) .
49 Audio Selection: “Audio Selection”
Select the Bluetooth audio player to be
connected. Refer to
device You Wish to Connect> (page 30) .
50 SMS Download: “SMS Download”
Download a short message. Refer to
(page 33) .
51 SMS Inbox display: “SMS Inbox”
Display the received short message. Refer to
(page 33) .
Function of KCA-BT200 (Optional Accessory).
52 Adding a voice command: “PB Name Edit”
Registers voice for voice recognition. Refer to
(page 31) .
Function of KCA-BT200 (Optional Accessory).
53 Voice command category setting: “PN Type
Edit”
Registers voice to select the Phone number
category in Phonebook. Refer to
Command for Category> (page 32) .
Function of KCA-BT200 (Optional Accessory).
54 Device Regist: “Device Regist.”
Register a Bluetooth device (pairing). Refer to
(page 28) .
55 Special Device Regist: “SPCL DVC Select”
Allow registration of a special device that cannot
be registered normally. Refer to
Special Bluetooth device> (page 28) .
56 Device Delete: “Device Delete”
Cancel registration of the Bluetooth device. Refer
to
(page 30) .
57 PIN Code Edit: “PIN Code Edit”
Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
(page 29) .