Kenwood KOS-A200 User Manual

Page 4

English

This Product is not installed by the manufacturer
of a vehicle on the production line, nor by the
professional importer of a vehicle into an EU
Member State.

Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)

Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their
waste byproducts. Contact your local
authority for details in locating a
recycle facility nearest to you. Proper
recycling and waste disposal will help
conserve resources whilst preventing
detrimental effects on our health and the
environment.

• No USB device comes with this unit. You need to

purchase a commercially available USB device. For
the types of available USB devices, refer to USB device> (page 5).

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check

with your Kenwood dealer to make sure that they
work with your model and in your area.

• The characters which can be displayed by this

unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ;
^ - { } | ~ ! ? # .

• The illustrations of the display and the panel

appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.

• The reception of tuner may be reduced a little if

the KOS-A200 is used.

• If your car stereo does not have muting, there

may be some noise before power switch of
control unit is ON and OFF. If this happens, turn
down the volume of the car stereo.

How to reset your unit

• If the unit fails to operate properly, take off power

supply cord plug from the unit. After waiting
several seconds, connect power supply cord plug
again. The unit returns to factory settings.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.

Notes

B64-3422-00_E_English.Indd 4

06.4.25 9:52:13 AM