Kenwood KMC-47GPS - Manual

© 2010-8 PRINTED IN JAPAN
B51-8930-00 (Y) 550
KMC-47GPS/48GPS
GPS SPEAKER MICROPHONE
SERVICE MANUAL
This product uses Lead Free solder. This product complies with the RoHS directive for the European market.
Lever (PTT)
(D10-0629-08)
Lever (PTT)
(D10-0629-08)
Document Copyrights
Copyright 2010 by Kenwood Corporation. All rights re-
served.
No part of this manual may be reproduced, translated,
distributed, or transmitted in any form or by any means, elec-
tronic, mechanical, photocopying, recording, or otherwise,
for any purpose without the prior written permission of Ken-
wood.
Disclaimer
While every precaution has been taken in the prepara-
tion of this manual, Kenwood assumes no responsibility
for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained
herein. Kenwood reserves the right to make changes to any
products herein at any time for improvement purposes.
General
Operating temperature range .....................–30°C~+60°C
(–22°F~+140°F)
Microphone
Impedance .................................................... 2.2k Ω (max)
Sensitivity ...................................... –45dB±5dB at 300Hz
Speaker
Impedance .........................................16 Ω±15% at 1.2kHz
Rating input ............................................................. 0.8W
Maximum input .........................................................1.6W
Dimensions (W x H x D) ......................... 62 x 81 x 36 mm
(2.44 x 3.19 x 1.42 inches)
Weight ...................... Approx. 230g/ 8.1oz.(KMC-47GPS)
230g/ 8.1oz.(KMC-48GPS)
GPS Receiver
Receiver system ...............................Parallel 12 channels
Receiver frequency
........................... 1575.42MHz±1MHz, L1 band, C/A code
GPS data format .................. Compatible with NMEA 0183
GPS data update cycle ............................. Every 1 second
SPECIFICATIONS
KMC-47GPS KMC-48GPS