Safety precautions – Kenwood KOS-A200 User Manual

Page 3

English

Safety precautions

About CD players/disc changers
connected to this unit

Kenwood disc changers/ CD players released in
1998 or later can be connected to this unit.
Refer to the catalog or consult your Kenwood
dealer for connectable models of disc changers/
CD players.
Note that any Kenwood disc changers/ CD players
released in 1997 or earlier and disc changers made
by other makers cannot be connected to this unit.
Connecting unsupported disc changers/CD players
to this unit may result in damage.
Set the "O-N" Switch to the "N" position for the
applicable Kenwood disc changers/ CD players.
The functions you can use and the information
that can be displayed may differ depending on the
models being connected.

• You can damage both your unit and the CD changer if

you connect them incorrectly.

2WARNING

To prevent injury or fire, take the
following precautions:

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools)
inside the unit.

• Mounting and wiring this product requires

skills and experience. For safety’s sake, leave the
mounting and wiring work to professionals.

2CAUTION

To prevent damage to the machine, take
the following precautions:

• Make sure to ground the unit to a negative 12V

DC power supply.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.

• When replacing a fuse, only use a new fuse with

the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could
damage the unit.

The "AAC" logo is trademark of Dolby
Laboratories.

B64-3422-00_E_English.Indd 3

06.4.25 9:52:13 AM