Kenwood KOS-A200 User Manual
Page 15
English
|
15
Program Type (PTY) Function
This function permits desired program types from
within the received Ensemble to be searched and
monitored.
1
Enter PTY Mode
Press the [
38] button.
• This function cannot be used during the interruption
of the announcement/ PTY Watch.
2
Select the program type
Press the [
5] or [∞] button.
Each time you press the button, the program
type changes.
Refer to the instruction manual of DAB tuner for
3
Search a service of the selected program
type
Press the [
4] or [¢] button.
When you want to search for other service, press
[
4] or [¢] button again.
• If the selected program type is not found, the
message ("NO PTY", etc.) is displayed.
When searching for a service of another program type,
repeat procedures 2 and 3.
Switching to Another Service:
Repeat procedure 3.
Another service of the same program type will
be searched.
Cancelling Search In the Middle:
Press the [
38] button.
Searching by program type and language
1
Press the button while in program type
selection mode
Press the [SCAN] button.
2
Selecting a language
Press the [
5] or [∞] button.
As for the available languages, refer to the
instruction manual of DAB tuner for
3
Searching by the selected program type and
language
Press the [
4] or [¢] button.
4
Exiting: Press the [SCAN] button.
Languages to be displayed
Select English, French, German, Dutch, Spanish,
Portuguese, Norwegian or Swedish in
selected language.
Program Type preset
Putting the Program Type in the Preset memory
and quick recall.
Presetting the Program Type
1
Select the Program Type to preset
Refer to
15).
2
Receive the Program Type to be preset
Press the [MEMORY] button.
"PRESET" is displayed.
3
Select a preset number
Press the desired [1] — [6] button.
4
Preset the Program Type
Press the [OK] button.
Recalling the preset Program Type
1
Enter PTY mode
Refer to
15).
2
Select a preset number
Press the desired [1] — [6] button.
B64-3422-00_E_English.Indd 15
B64-3422-00_E_English.Indd 15
06.4.25 9:52:17 AM
06.4.25 9:52:17 AM