Kenwood TK-3170E6 - Manual (Page 44)

37
S
CRAMBLER
Although the scrambler function does not offer complete
privacy, it does prevent others from easily listening in on your
calls. When activated, the transceiver distorts your voice so
that anybody listening to your conversation will not be able to
clearly hear what you are saying.
In order for members of your own group to hear your call
while you are using the scrambler, all members must activate
the scrambler functions on their transceivers. This distorts
everybody’s voice while transmitting and corrects the voice
message on your own transceiver when you receive the call.
To activate the scrambler, press the key programmed as
Scrambler.
• The icon appears when the scrambler is active.
To deactivate the scrambler, press the Scrambler key again.
Note:
◆ There are 2 options for using the scrambler. Your dealer can
activate or deactivate the built-in scrambler function of the
transceiver, or they can add a more secure optional scrambler
board to your transceiver. Ask your dealer for details.
◆ The scrambler does not function while operating in SmarTrunk
Trunking mode {page 18}.
T
RANSCEIVER
B
ACKLIGHT
To turn the transceiver display backlight on, press the key
programmed as Lamp.
• Pressing any key other than the PTT switch and the Power
switch/ Volume control while the backlight is on will reset the
lamp timer, allowing the backlight to remain lit for an additional
5 seconds.
To turn the display backlight off immediately, press the Lamp
key while the backlight is on.