Kenwood TK-3170E6 - Manual (Page 30)

23
• Press and hold the 0 key to enter a Group digit.
• Alternatively, press and hold the S or key to enter Selcall
List mode. With the Selcall List activated, you can select the
desired station by rotating the selector. Press and hold the
Side 1 key to toggle the display between the station name
and the list number.
3 Press the S or key to complete the entry.
Note: Additionally, you can also use the keys programmed as Digit
1x Down, Digit 1x Up, Digit 10x Down, and Digit 10x Up keys to
adjust the Selcall number. Digit 1x Up/Down increases/decreases
the Selcall number by 1 each time the key is pressed. Digit 10x Up/
Down increases/decreases the Selcall number by 10 each time the
key is pressed.
R
ECEIVING A
S
ELCALL
When you receive a signal containing the correct tones,
squelch opens and you will hear the call.
• The LED indicator flashes orange and the received Selcall
appears.
• To mute the speaker after squelch opens, press the key
programmed as Monitor.
• Your dealer can program the monitor function to close again after
a specific time period elapses.
• If Transpond for 5-tone Signaling is programmed, an
acknowledgment signal is returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone will
sound when the correct tones are received.
• Your dealer can program the transceiver to display the received
Selcall.
To respond to the call, press the PTT switch and speak into
the microphone.