Kenwood K-821DV - Manual (Page 103)

103 English
Troubleshooting
Microcomputer mal-
function (the system
does not work, the
display is faulty, etc.). Malfunctions may occur due to an external cause or because a connec- z
tion cord was unplugged while the system was turned on.
Use the procedure below to reset the microcomputer.
Symptoms Solution
Resetting the microcomputer
1 Unplug the power cord from the AC
wall outlet.
2 Plug the power cord back in while
holding down the power [K] key on
the main unit.
3 Upon the start of the microcomputer
resetting, the display shown on the
right appears.
During the resetting of microcomputer, z
the display goes out.
4 When fi nish resetting, it turns to
Standby Mode.
Bear in mind that resetting erases any z
stored information and restores the
system's default settings.
B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 103 B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 103 10.1.25 4:56:45 PM 10.1.25 4:56:45 PM