Cd/dvd – Kenwood K-821DV User Manual
Page 100

100
K-821DV
Troubleshooting
Symptoms
Solution
Ref. page
CD/DVD
A CD/DVD does not play
back when loaded.
Load the disc correctly with the label side facing upward.
z
Clean the disc. (See
z
Allow any condensation to evaporate. (See z condensation.) 30 105 No sound/picture out- Press the z [CD/DVD D] key. Clean the disc. (See z Check every cord for correct connection. z 30 105 10-15 Playback skips. Clean the disc. (See z 105 Some fi les can't play The system will not play fi les that are corrupted. z Make sure the fi le is supported for playback on the z system. 26 Delay until playback There may be a delay prior to playback if there are large z numbers of folders. 37 TAG information is not Refer to z information can be displayed on this system. 26 The subtitle is not dis- The subtitle cannot be displayed when the DVD disc be- z ing played does not contain the recording of subtitles. z 44 The voice (or subtitle) The voice (or subtitle) language cannot be changed z when the DVD disc being played does not contain the — The viewing angle can- The viewing angle cannot be changed when the DVD z disc being played does not contain the recording of z limited sections in a disc. — The voice or subtitle Use a DVD disc containing the recording of the selected z voice or subtitle language. z and select the language. z screen. Select at the menu screen of the disc. 44 34 A VCD cannot be played Menu playback is available only with VCD discs recorded z with P.B.C. — B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 100 B60-5815-08_01_GVT0295-001B_K-821DV_En.indb 100 10.1.25 4:56:44 PM 10.1.25 4:56:44 PM
105
put
back.
starts.
displayed correctly.
played.
Press the [SUBTITLE] key to switch on the subtitle mode.
language cannot be
changed.
recording of more than 1 voice (or subtitle) language.
not be changed.
more than 1 angle.
More than 1 viewing angle may be recorded only in
language selected in
the initial setting is not
played.
Press the [SUBTITLE] or the [AUDIO] key on the remote
The DVD specifi cations provide for selection at the menu
using menus.