Bluetooth control, Registering and connecting bluetooth unit, Registering and connecting – Kenwood DNX521VBT User Manual
Page 30: Bluetooth unit, P.58), Luetooth control
58
58
59
Using the Bluetooth function, various
functions can be used: making/receiving a
call.
About the cell-phone
This unit conforms to the following
Bluetooth specifications:
Version
Bluetooth Ver. 2.0 + EDR
Profile
Cell-phone:
HFP (Hands Free Profile)
NOTE
• For the cell-phones verified for compatibility,
access the following URL:
http://www.kenwood.com/cs/ce/bt/
.
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.
Registering And Connecting Bluetooth Unit
It is necessary to register the cell-phone to
this unit before using the Bluetooth function.
You can register up to 5 Bluetooth unit.
1
Press the
Hands Free screen appears.
B
luetooth Control
2
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Registering the Bluetooth Unit
• Connecting the Bluetooth unit
Registering the Bluetooth Unit
1
Touch [SET] of [Regist New Device].
Searched Device List screen appears.
NOTE
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See
2
Touch [PIN Code Set].
PIN Code Set screen appears.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
3
Enter PIN code and touch [Enter].
The entered code is recognized and
Searched Device List screen appears
again.
4
Select the Bluetooth unit to register
from the list.
The Connection Device List screen
appears.
NOTE
• Registering operation can be performed from the
Bluetooth unit. In this operation, entering the PIN
code is necessary. See
.