Kenwood DNX521VBT - Manual (Page 32)

62 62 63
Return to the Top page
Bluetooth Operation
Return to the Top page
Bluetooth Operation
*1 You can sort the list to begin with touched
character.
• Characters with no corresponding name
will not appear.
• During search, a non-accent character
such as “u” is searched for instead of an
accent character such as “ü”.
*2 You can set the list to arrange in the order
of last name or first name. For details, see
Setting up the Hands-Free phone (P.65) .
NOTE
• While your car is moving, some functions are
disabled for safety reasons. The keys associated
with the disabled functions become ineffective
if touched.
• The status icons such as battery and antenna
displayed may differ from those displayed on the
cell-phone.
• Setting the cell-phone in the private mode can
disable the hands-free function.
Receiving a call
1 Touch [ ] to answer a phone call or
[
] to reject an incoming call.
NOTE
• While monitoring the camera view, this screen
does not appear even if a call comes in. To display
this screen, press the button or return the
shift knob of car to the driver position.
Operations during a call
Adjust the receiver volume
Turn the volume knob.
Switch the voice output
Touch [
] to switch the voice output
between phone and speaker.
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Bluetooth Setup
You can register PIN code, select the device
to connect, and perform output setup.
1 Press the button.
Hands Free screen appears.
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Register the PIN code (P.64)
• Select the unit to connect (P.60)
• Set up output (P.64)