Memory operation, Auto memory (p.51), Multi function menu (p.50) – Kenwood DNX521VBT User Manual
Page 26
50
50
51
Multi function menu
Analog TV
Digital TV
The functions of each key are as follows.
[P1] - [P6] (analog TV only)
Selects the preset channel. Touch for 2 seconds to store the current station into the preset memory.
[
]
Displays the list of preset channels.
[BAND] (analog TV only)
Touch to switch the band.
[SEEK] (analog TV only)
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in channels with good reception automatically.
• AUTO2: Tunes in channels in memory one after another.
• MANUAL: Switches to the next channel manually.
[AME] (analog TV only)
Selects the auto memory mode. For details, see
[
SETUP]
Touch to display the SETUP Menu screen. See
.
[
AUDIO]
Touch to display the Audio Control screen. See
.
[ REAR
]
Touch to mute the rear speaker.
Memory Operation
Auto memory
You can store stations with good reception in
memory automatically.
This function is for tuner and analog TV only.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
Tuner
1
Touch [
].
Sub function menu appears.
2
Touch desired band key.
3
Touch [
] in the control screen.
The multi function menu appears.
4
Touch [AME] in the multi function
menu.
5
Touch [
1] or [¡] in the sub
function menu.
Auto memory starts.
TV
1
Touch illustrated area during
playback to switch the band you want
to store in memory.
2
Touch illustrated area.
Simple Control screen appears.
3
Touch [
] in the control screen.
The multi function menu appears.
4
Touch [AME] in the multi function
menu.
5
Touch [
4] or [¢] in the function
menu.
Auto memory starts.