Kenwood M-505USB-S - Manual (Page 19)

EN
19
Sleep timer operation
Sleep timer ON/OFF
If the sleep timer turns on, the system will switch to
the standby mode after the current setting time has
expired.
1 Press TIMER ON/OFF button.
The sleep timer turns on and “SLEEP” icon appears.
If the sleep timer has been on, it is canceled.
⁄
• Initial setting of the delay time is 90 minutes.
• To chenge the delay time, see below.
Changing and Turning Sleep timer on
The delay time can be changed within the range of
10 to 90 minutes.
1
Press SLEEP button.
Current setting time appears.
Each pressing it changes the delay time in order of
following:
90
= 80 = 70 = ... 20 = 10 = off = 90 = 80
= 70...
2 Press TIMER SET button while the desired delay
time.
The sleep timer turns on and “SLEEP” icon appears.
⁄
• The delay time selection is changed and the display returns to
last mode if no operation for 20 seconds.
M-505USB_EN_r12.indd 19 M-505USB_EN_r12.indd 19 07.8.29 4:44:47 PM 07.8.29 4:44:47 PM