Kenwood TS-590S User Manual

Page 10

4.3 ARUA-10 Settings

Follow the steps below to set up the ARUA-10

① Connect the TS-590S and computer using a USB cable.

② To launch the software, select Start Button > Programs > Kenwood > ARUA-10.

③ After launching the ARUA-10, a “Task Tray” icon

appears. Right click this icon

and select “Device Settings” from the menu. The window shown below appears.

In this window you can specify sound devices for the transceiver’s audio reception

output and modulated audio input. You can also specify which microphones and

speakers connected to the computer to use.

In the above example, the computer has recognized four types of input sound

devices.

・ Microphone (USB Audio Codec)
・ Microphone (SoundMAX Integrated Digital Audio)
・ Line In (SoundMAX Integrated Digital Audio)
・ Phone (SoundMAX Integrated Digital Audio)

There are two types of output sound devices.

・ Speakers (USB Audio Codec)
・ Speakers (SoundMAX Integrated Digital Audio)

* The items listed depend on the operating system and sound devices used.