Kenwood TK-7180E - Manual (Page 23)

17
■ R
EVIEWING
M
ESSAGES IN THE
Q
UEUE
M
EMORY
1 Press the key programmed as Queue to enter Queue Mode.
• The last received message is displayed with the message number.
2 Press the and C> keys to select the desired message.
• If programmed by your dealer, you can also use the and keys.
• Press and hold the S or DTMF key to toggle between the message/ call ID,
the channel name, and the time of the received message.
3 Press the S or DTMF key to return to Normal Operation Mode.
• To delete the selected message, press the A or DTMF # key. To confirm the
deletion, press the S or DTMF key.
• To delete all messages, press and hold the A or DTMF # key for 1 second. To
confirm the deletion, press the S or DTMF key.
S
HORT
M
ESSAGES
To send a short message, you must connect the transceiver to a PC. Ask your
dealer for details.
• Short messages can contain a maximum of 48 characters.
• Received short messages are displayed the same as Status messages and are stored
in the same Queue memory. A combined maximum of 15 Status calls and short
messages can be stored in the Queue memory.
L
ONG
M
ESSAGES
To send and receive long messages, you must connect the transceiver to a PC.
Ask your dealer for details.
• Long messages can contain a maximum of 4096 characters.
GPS R
EPORT
To send your location data, you must first install a GPS unit (NMEA-0183 format)
onto the transceiver. Press the key programmed as Send the GPS data to
transmit your location data. Ask your dealer for details.