Kenwood TK-7180E - Manual (Page 17)

11
S
CAN
R
EVERT
You can select Revert zones and channels using the Zone and CH/GID keys.
Eight types of Scan Reverts which can be programmed by your dealer are
available.
• Last Called Revert: The last zone/ channel received is assigned as the new revert
zone and channel.
• Last Used Revert: The last zone/ channel responded to is assigned as the new
revert zone and channel.
• Selected: The last zone/ channel selected is assigned as the new revert zone and
channel.
• Selected + Talkback: If the zone/ channel has been changed during Scan, the newly
selected zone/ channel is assigned as the new revert zone and channel. The
transceiver “talks back” on the current receive channel.
• Priority 1: If your dealer has programmed a Priority 1 channel, this channel is the
revert zone and channel.
• Priority 1 + Talkback: If your dealer has programmed a Priority 1 channel, this
channel is the revert zone and channel. The transceiver “talks back” on the current
receive channel.
• Priority 2: If your dealer has programmed a Priority 2 channel, this channel is the
revert zone and channel.
• Priority 2 + Talkback: If your dealer has programmed a Priority 2 channel, this
channel is the revert zone and channel. The transceiver “talks back” on the current
receive channel.
P
RIORITY
S
CAN
A Priority channel must be programmed in order for Priority Scan to function.
The transceiver will automatically change to the Priority channel when a signal is
received on it, even if a signal is being received on a normal channel.
• The indicator represents the Priority 1 channel.
• The indicator represents the Priority 2 channel.
• The indicator represents both the Priority 1 and Priority 2 channel.